Share information:
Car clutch repair Toyota Corolla 5 (E80)
Clutch design and operation
The clutch consists of a pressure plate (clutch baskets), driven disk and hydraulic clutch drive system. The pressure and driven disks are fixed to the engine flywheel. The clutch housing contains a clutch release fork....
The clutch consists of a pressure plate (clutch baskets), driven disk and hydraulic clutch drive system. The pressure and driven disks are fixed to the engine flywheel. The clutch housing contains a clutch release fork....
Removal, installation and testing of the clutch
Removal Remove the gearbox . Mark the position of the pressure plate in relation to the flywheel with a marker or scriber. To prevent the flywheel from turning when loosening the bolts, hold the flywheel by the toothed...
Removal Remove the gearbox . Mark the position of the pressure plate in relation to the flywheel with a marker or scriber. To prevent the flywheel from turning when loosening the bolts, hold the flywheel by the toothed...
Removal and installation of the clutch actuator hydraulic cylinder
The clutch actuator hydraulic cylinder acts on the clutch release bearing via the rod. Disassembly of the hydraulic cylinder should be carried out in specialized workshops. Removal If the hydraulic cylinder is subject...
The clutch actuator hydraulic cylinder acts on the clutch release bearing via the rod. Disassembly of the hydraulic cylinder should be carried out in specialized workshops. Removal If the hydraulic cylinder is subject...
Bleeding the clutch release hydraulic system
The clutch release hydraulic system must be bled if the clutch pedal does not return or returns too slowly, gears are difficult to disengage, or if the hydraulic system has been opened. Since the hydraulic clutch drive...
The clutch release hydraulic system must be bled if the clutch pedal does not return or returns too slowly, gears are difficult to disengage, or if the hydraulic system has been opened. Since the hydraulic clutch drive...
Checking and adjusting the clutch pedal
The pedal height and pedal travel must be checked if there are difficulties in engaging and disengaging the clutch, as well as after dismantling the master cylinder. Checking and adjusting the pedal height Measure the...
The pedal height and pedal travel must be checked if there are difficulties in engaging and disengaging the clutch, as well as after dismantling the master cylinder. Checking and adjusting the pedal height Measure the...
This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar sections for other Toyota models
➥ Clutch and drive shafts Toyota Camry XV10 (1991-1996)
➥ Clutch Toyota 4Runner N120 (1989-1995)
➥ Clutch Toyota Corona T190 (1992-1997)
➥ Clutch Toyota RAV 4 XA10 (1994-2000)
➥ Clutch Toyota Carina T170 (1988-1992)
➥ Clutch Toyota Cruiser 70 (1985-1996, diesel)
Link in different formats to this article
TEXTHTMLBB Code
- General information
- User manual
- Start of movement
- Faults en route
- Maintenance
- Power unit
- Engine repair
- Lubrication system
- Cooling system
- Ignition system
- Supply system
- Fuel supply (carburetor)
- Fuel supply (injector)
- Diesel engine
- Exhaust system
- Transmission
- Clutch
- Manual gearbox
- Automatic gearbox
- Chassis, running gear
- Front suspension
- Rear suspension
- Steering
- Brake system
- Wheels and tires
- Body and interior
- Exterior (external elements)
- Interior (internal elements)
- Interior heating
- Electrical equipment
- Equipment and devices
- Power devices
- Lighting system
- Glass cleaners and washers
- General information
- User manual
- Power unit
- Petrol engines 1ZZ, 3ZZ
- Diesel engines 1СD-FTV
- Cooling system
- Lubrication system
- Fuel system
- Control system
- Exhaust system
- Transmission
- Clutch and drive shafts
- Mechanical gearbox
- Chassis, running gear
- Car suspension
- Steering
- Brake system
- Body and interior
- Exterior (external elements)
- Electrical equipment
- Power devices
- Electrical circuits