Note. Install in the reverse order of removal. If some of the installation steps have distinctive features, they are mentioned in the appropriate section with a common title «Installation».
After disconnecting the 15 mounting clips, remove the boot lid trim.
Loosen the four fixing screws.
Wrap the end of the screwdriver with plaster. Pry up the ends of the lining, remove it. Using a screwdriver and white spirit, carefully clean the notches under the trim.
Tape the contact surface of the pad with new adhesive tape and install the pad in place.
Pic. 8.48. Removal and installation of a decorative overlay of a luggage carrier
Tighten the four fixing screws (pic. 8.48).