Checking the antenna motor
1. Connect the battery to terminals "2" (+) and "3" (-) of the connector.
2. Check that the engine is running (the antenna extends).
Note: This test should be carried out for no more than 3 - 5 seconds, otherwise the electric motor winding may be damaged.
3. Change the polarity of the power supply, check that the direction of rotation has changed (the antenna is retractable).
If operation is not as described, replace the motor.
Checking the antenna drive control relay
Disconnect the connector from the relay and check the circuit from the connector side of the wires.
If the circuit matches the table, then the fault is in the relay, replace it.
