Removing
1. Drain the coolant (see chapter "Maintenance and general inspection and adjustment procedures").
2. Drain the engine oil.
3. Remove the lower engine protection.
4. Remove the oil pan.
A) Loosen the oil pan mount.
Removal and installation of the oil pallet (EJ-series).
1 - stuffing box cover,
2 - cylinder block,
3 - gasket,
4 - oil pump,
5 - oil pan,
6 - gasket,
7 - oil receiver.
b) Insert the tool blade between the crankcase and sump. Cut off the sealant and remove the pan.
Installation
1. Install the oil pan.
A) Remove sealant residue from mating surfaces. Use a solvent to remove traces of dirt and oil.
b) Apply a 3-4 mm bead of sealant to the oil pan as shown.
V) Establish the pallet on the block of cylinders.
Note: The oil sump must be installed within the time specified in the sealant instructions for use, otherwise the sump must be removed, the sealant cleaned and reapplied.
3. Install the lower motor guard.
4. Fill with engine oil.
5. Fill in coolant.