2. Using the special tool, unscrew the emergency oil pressure switch.
3. Using an adapter, install a pressure gauge in place of the oil pressure sensor.
Series K3
EJ-series
4. Warm up the engine to operating temperature.
5. Check oil pressure.
Oil pressure:
KZ series:
- idling - 0.4 kg / cm2
- 3000 rpm - more than 2.3 kg / cm2
EJ Series:
- idling - 0.2 kg / cm2
- 3000 rpm - 2.5-5.0 kg / cm2
6. Remove the pressure gauge and install the emergency oil pressure sensor.
A) Remove the pressure gauge and adapter.
b) Apply adhesive sealant to two or three threads of the emergency oil pressure switch.
V) Install the emergency oil pressure switch.
Torque:
- short circuit series - 15 Nm
- EJ series - 14 Nm