Editor's note: Here, dampers refer to air flaps.
1. Installing the air damper.
Set the damper and control lever to the FRESH position (fresh air intake).
2. Installing the mode selection damper.
Set the damper and control lever to the VENT position (ventilation).
3. Installing the offset damper.
Set the damper and control lever to the COOL position (cooling).
4. Installing the valve.
Set the valve and control lever to the COOL position.
(The original can be read on the website: www.TOYOTAMAN.ru)
Note: Move the valve lever to the COOL position and, pulling the cable sheath in the direction of increasing cooling, secure the sheath to the valve bracket.
5. Checking the operation of the cable.
When moving the control lever, make sure that there is no jamming throughout the entire range of movement of the lever.