2. Install two pads with pad wear indicator on top (3S-GE engine) or from below (3S-FE engine).
Caution: Do not allow oil or grease to come into contact with the running surfaces of the pads and disc.
3. Install the caliper and tighten the mounting bolt. Tightening torque 20 Nm.
4. Connect the brake hose Install the brake hose with two new gaskets. Tightening torque 30 Nm.
Note: Install the brake hose retainer in the caliper hole when reassembling.
5. Fill the reservoir with brake fluid and bleed the brake system.
6. Check for leaks.