Adjustment
Tailgate adjustment.
Backdoor.
1 - rear door interior trim,
2 - door lock,
3 - lock cylinder door lock,
4 - rear door lock cylinder,
5 - door pillar,
6 - door seal.
1. Check the gaps between the rear door and the car body as shown in the figure "Rear door adjustment".
Rated value:
Duet:
- "1" — 7.6±1.5 mm
- "2" — 5.5±1.5 mm
Sirion:
- "3" - 4.0±1.5 mm
2. Adjust rear door gaps,
A) Loosen the bolts and adjust the position of the door.
- Tightening torque - 10 -15 Nm
b) Remove the lock shackle trim, loosen the fastening screws and adjust the shackle position.
Disassembly
1. Disconnect caps and remove internal furnish of a door.
2. (Models with wipers: rear window)
A) Remove the wiper arm and strut.
b) Remove the 3 bolts and remove the wiper motor.
3. Turn away 4 nuts and remove the external handle of opening of a door.
4. Remove the door lock cylinder.
5. Turn away 2 bolts and remove the door lock.
6. Remove the service port cover.
Assembly
1. Assembly of a back door is made in an order, the return to removal.
2. When assembling the tailgate, pay attention to the following points:
A) Before installing the door lock, apply sealant to the screw threads.
b) Install the service hole cover with adhesive and seal the hole with protective tape.