Hood adjustment
1. Check clearances between body and hood (see picture "Hood adjustment").
Rated value:
- "1" — 4.3±1.5 mm
- "2" — 7.0±1.5 mm
- "3" — 2.0±1.5 mm
2. If the values are out of specification, adjust the clearances.
A) Adjust the position of the hood in the longitudinal and transverse directions by loosening the bolts securing the hinges to the hood.
- Tightening torque - 6-11 Nm
Note: In case of replacement of bolts, also adjust.
b) Adjust the position of the hood latch by loosening the mounting bolts.
V) Adjust the position of the front edge of the hood by turning the cushions.