2C
- A) Connect the solenoid valve lead and body to the appropriate battery terminals
- b) When closing and opening the contacts, a characteristic click should be heard. If there is no click, replace the valve.
2C-T
- A) Using an ohmmeter, measure the resistance between the terminal and the solenoid valve body. Resistance at 20°C: 9.5-11.9 ohms.
If the resistance does not match the above values, replace the solenoid valve.
2. Check the tachometer sensor. Measure the resistance at the connector terminals with an ohmmeter.
Resistance:
- 2C 600-800 Ohm
- 2S-T 650-970 Ohm
If the resistance is out of specification, replace the sensor.