- A) Install a new gasket to the fuel pump bracket.
- b) Install the fuel pump and fuel level sensor assembly and tighten the eight bolts.
- V) Connect the following connectors:
- Fuel pump and fuel level sensor connector;
- fuel outlet tube;
- Fuel return hose.
2. Connect the wire to the negative terminal (-) battery.
3. Check for fuel leaks by running the engine for 2-3 minutes.
4. Install the service hatch cover by tightening the five screws.
- A) (Type A) Tighten the 5 screws and install the service hatch cover.
- b) (Type B) Connect the wiring harness, tighten the 5 screws and install the service hatch cover.
5. Install the rear seat cushion.