Exterior (external elements) of the body Toyota Land Cruiser 100

General information about the car body
Warning! The models of vehicles discussed in this manual may be equipped with a supplemental restraint system (SRS). Before performing any work near the air bag units, steering column or instrument panel, turn off the...

Body specifications and dimensions
Overall dimensions Cm. Specifications to the Chapter Controls and techniques for safe operation of the vehicle . Control body dimensions See illustrations below. Tightening force of threaded connections, Nm Connection...

Car body and underbody components care
It should be remembered that the main factor determining the selling price of a used car is the condition of its body. Body panel maintenance procedures are extremely simple and should be performed on a regular basis....

Repair of minor damage to body panels
Restoration of lightly scratched paintwork 1. If you cannot access the back of the body panel to knock out the dent, you should pull it out using a sliding hammer. In the deepest part of the dent, or along its border,...

Repair of seriously damaged body panels
Such repairs are usually performed using welding equipment and must be carried out in a car service workshop. In case of extensive damage, the first thing to check is whether there has been any displacement or...

Removal, installation and adjustment of the hood position
Removal and installation Note: The hood panel is quite heavy, so you may want to have an assistant help you. 1. Open the hood, then cover the fenders with special pads or just old blankets to protect them from damage...

Removal and installation the hood lock latch and its drive cable
Warning! The models of vehicles covered in this manual are equipped with a supplemental restraint system (SRS). Before performing any work near the air bag unit, steering column or instrument panel, turn off the SRS to...

Removal and installation the decorative radiator grille
Warning! The models of vehicles covered in this manual are equipped with a supplemental restraint system (SRS). Before performing any work near the air bag unit, steering column or instrument panel, turn off the SRS to...

Removal and installation front and rear bumpers
Note: It may be helpful to have an assistant assist you during the bumper removal and installation procedures. Front bumper Front Bumper Installation Details 1 - Headlight; 2 - Decorative grille; 3 - Front side light; 4...

Removal and installation exterior rearview mirrors
1. Remove the triangular decorative trim panel of the door mirror support and unscrew the mounting bolts located underneath it; if equipped, disconnect the mirror drive wiring. 2. Remove the door mirror assembly from...

Removal and installation front fenders
Warning! The models of vehicles covered in this manual are equipped with a supplemental restraint system (SRS). Before performing any work near the air bag unit, steering column or instrument panel, turn off the SRS to...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Similar sections for other Toyota models

➥ Exterior (external elements) Toyota RAV 4 XA10 (1994-2000)
➥ Exterior (external elements) Toyota Carina T190 (1992-1996)
➥ Exterior (external elements) Toyota 4Runner N120 (1989-1995)
➥ Exterior (external elements) Toyota Corolla Verso 3 (2004-2009)
➥ Exterior (external elements) Toyota Camry XV20 (1996-2001)
➥ Exterior (external elements) Toyota Highlander 1 (2000-2007, petrol)

Link in different formats to this article

TEXTHTMLBB Code