Doors, locks and windows of the car Toyota Land Cruiser 100

Maintenance of car hinges and locks
Every 5,000 km, or every three months, the hinges and assemblies of the door, hood and trunk lid lock latches should be lubricated with a few drops of liquid oil or a special lubricant for locks. The strikers of the...

Replacement of windshield and other fixed glass
Replacing a windshield or other fixed glass on a vehicle requires one of the special quick-setting adhesive or sealant compounds. In addition, this work cannot be done properly without some special tools and experience....

Removal and installation interior door trim panels
Attention! To avoid getting cuts on your hands on the edges of the technological windows in the door frame, work with gloves! Removal 1. On models equipped with power windows, disconnect the negative battery cable....

Removal, installation and adjustment of doors
Removal and installation Front door and its components Note: Car doors are quite heavy, so it may be a good idea to have an assistant assist you. Attention! To avoid getting cuts on your hands on the edges of the...

Removal, installation and adjustment of the tailgate
Note: Due to the significant weight of the tailgate assembly, it is wise to enlist the help of an assistant. Tailgate design 1 - Window regulator; 2 - Right window regulator guide; 3 - Door stop; 4 - Rear window; 5 -...

Removal and installation the rear door glass and window regulator
Tailgate design 1 - Window regulator; 2 - Right window regulator guide; 3 - Door stop; 4 - Rear window; 5 - Left window lift guide; 6 - Door lock; 7 - Guide tape for window opening trim; 8 - External sealing tape; 9 -...

Removal and installation of door glass
Attention! To avoid getting cuts on your hands on the edges of the technological openings in the door frame, work with gloves! Lower the window to its lowest position. On models equipped with power windows/single...

Removal and installation window regulators
Attention! To avoid getting cuts on your hands on the edges of the technological windows in the door frame, work with gloves! 1. On models equipped with power windows and single locking, disconnect the negative battery...

Removal and installation of latches, lock cylinders and door handles
Attention! To avoid getting cuts on your hands on the edges of the technological windows in the door frame, work with gloves! 1. On models equipped with power windows and single locking, disconnect the negative battery...

Removal and installation the upper hatch cover with drive
Note: When removing the interior trim panels, stock up on various clips - they often break during removal. Location of sunroof controls 1. Remove the following components: Tailgate threshold trim; Back seat; Left and...

Removal and installation the interior rearview mirror
Glued mirror 1. If the mirror has a backlight, disconnect the ground wire from the battery. 2. Disconnect the existing wiring from the mirror. 3. Grasp the base of the mirror securely and turn it counterclockwise half a...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Similar sections for other Toyota models

➥ Doors, windows and locks Toyota Corona T190 (1992-1997)
➥ Doors, locks and windows Toyota Highlander 1 (2000-2007, petrol)
➥ Doors, locks and windows Toyota Camry XV20 (1996-2001)
➥ Doors, locks and windows Toyota RAV 4 XA10 (1994-2000)
➥ Doors, locks and windows Toyota 4Runner N120 (1989-1995)

Link in different formats to this article

TEXTHTMLBB Code