Removal and installation
Note:
- Removal is carried out in accordance with the figure "Pressure sensors in the main brake cylinder".
- Install in the reverse order of removal.
Pressure sensors in the main brake cylinder.
1 - sensor-switch for pressure in the main brake cylinder,
2 - pressure sensor in the main brake cylinder.
Examination
1. Turn off the ignition.
2. Connect tester leads to terminals "26" And "58" connector of the control unit for vehicle controllability improvement systems.
3. Turn on the ignition.
4. Measure the voltage.
Rated voltage:
- brake pedal released - 0.4 - 0.6 V
- brake pedal force 10 kg - 2.4 - 2.6 V