Precautions when replacing lamps
1. Do not touch the glass part of the lamp as this will reduce its service life.
2. If oil gets on the lamp bulb, remove it, otherwise the lamp life will be significantly reduced due to overheating during operation.
3. Due to the high pressure in the lamp bulb, it can be damaged even by minor impacts and falls.
4. Try to replace the bulbs quickly to avoid dirt and dust getting into the headlight.
5. When replacing, use lamps of the same power as the ones being replaced.
6. Pay attention to the correct installation of the lamps, otherwise dirt and water may get into the headlights.
Headlight adjustment
1. Preparation.
a) Adjust the tire pressure.
b) Place the passenger in the driver's seat.
d) Turn on the engine (the battery must be fully charged).
2. Adjust the position of the high and low beam headlights using the adjusting screws (screw "1" - vertical adjustment, screw "2" - horizontal adjustment).
Left headlight
Right headlight
Disassembly and assembly of headlights
When disassembling and assembling, refer to the assembly drawing "Headlights".
Headlights:
1 - headlight lamp cover,
2 - headlight bulb,
3 - side light bulb socket,
4 - marker lamp,
5 - turn signal lamp cover,
6 - direction indicator lamp,
7 - headlight.