2. Install the seal on the glass.
Warning: If the sealing conditions are not met when installing the old seal, install a new seal.
A) Insert the cord into the groove of the seal as shown in the figure.
3. Install the glass.
A) Apply soapy water to the mating surfaces of the body flare seal flange.
b) Fix the glass in its place in the body.
Note: glass installation should be started from the middle of the lower part.
V) From the inside, pull one of the ends of the cord, placing it at an angle to the seal, so that the cord pulls the seal flange behind the body flange. At the same time, from the outside, press the glass along the seal until the glass snaps into place.
4. Check the tightness of the connections. Repair if there are leaks.
5. Install the following parts: leash with wiper brush, interior rearview mirror, sun visor, assist handle.