Removing
If the hydraulic cylinder is to be repaired, disconnect the hydraulic supply from it. Collect escaping brake fluid in a container. Rules for handling brake fluid.
Attention: When dismantling the gearbox, do not disconnect the hydraulic lines. Otherwise, it is necessary to bleed air from the system during subsequent assembly. When disassembling the system, hang the executive hydraulic cylinder on a wire to the side of the body.
Disconnect the hydraulic actuator from the gearbox housing.
Installation
Install the slave cylinder and fasten it with bolts with a force of 12 Nm.
Connect the hydraulic conduit by tightening the nut with a force of 15 Nm.
Bleed the clutch release hydraulic system.