2. If necessary, replace the ignition lock cylinder.
- A) Set the ignition key to position "ACC".
- b) Press the locking pin with a thin rod and remove the lock cylinder.
- V) Make sure the ignition key is set to "ACC".
- G) Install a new ignition lock cylinder.
3. Check that the bearing rotates smoothly, without binding or abnormal noise. If the bearing is worn or damaged, replace the steering column tube.
4. Check the main shaft bushing.
- A) Using a screwdriver, remove the bushing.
- b) Check bushing.
- V) Align the tabs of the new bushing with the holes in the steering column tube and insert the bushing into the tube.
- G) Apply grease to the bushing.