Add fluid if necessary. Working fluid ATF DEXROtf II Note: If the working fluid is warmed up, the fluid level is in the range "NOT" on the tank or dipstick, if cold - in the interval "COLD".
2. Start the engine and turn the steering wheel from lock to lock three or four times.
When the engine speed is 1000 rpm, turn the steering wheel to the maximum angle and hold it in this position for 2-3 seconds, then turn the steering wheel in the other direction to the maximum angle and hold it in this position for 2-3 seconds.
3. Check for foaming or emulsification of the liquid.
4. Check fluid level rise.
- A) Measure the fluid level with the engine running.
- b) Stop the engine and measure the fluid level.
The maximum increase in the liquid level is 5 mm.
If the increase in fluid level is more than 5 mm, bleed the system.