2. Remove cotter pin and cap.
Attention: to carry out the test, alloy wheels must be replaced with wheels with conventional wheels.
3. Install the special tool on the hub as shown.
4. Install the pitch and roll camber gauge.
5. Check the camber of the front wheels, the longitudinal and transverse inclination of the axes of rotation.
Camber — 0°02'±45'
Pitch - 0°35'±45'
Cross tilt of the axis of rotation:
- 2WD — 13°25'±45'
- 4WD — 13°15'±45'
The difference in camber and longitudinal inclination of the axis of rotation of the right and left wheels is less than 30'