Speed sensor #2 (A245E) [Toyota Corona T190]

Replacement

1. Disconnect the sensor connector.



2. Remove speed sensor #2.

• a) Unscrew the bolt and remove the sensor.
• b) Remove the sealing ring from the sensor.

3. Install speed sensor #2.

• a) Lubricate the new sealing ring with working fluid and install it on the sensor.
• b) Install the sensor in the gearbox housing and tighten the bolt. Tightening torque 5.4 Nm.

The article was copied from the portal: www.ToyotaMAN.ru

4. Connect the sensor connector.