Engine stops while driving
1. Reduce speed gradually. Move the car to a safe place.
2. Turn on the hazard warning lights.
3. Try to start the engine.
Note: When the engine is not running, the brake and power steering will not function, so the steering and braking system will require more effort from the driver than usual.
Engine overheating
Note: If the engine coolant temperature gauge shows overheating, you feel a loss of power, or if you hear a noise like a light metallic knocking sound, the engine is probably overheating.
1. Move the vehicle to a safe location. Set the automatic transmission selector to position "P" or the gearshift lever to neutral and apply the parking brake. Turn off the air conditioning, if used.
2. If coolant or steam is escaping from under the hood, the engine must be stopped. Wait until the boiling subsides before opening the hood.
The material is reprinted from an online resource ToyotaMan.ru
Attention:
- If the coolant is not boiling or splashing out, leave the engine running.
- To avoid thermal burns, leave the hood closed until steam escapes. Escaping steam or coolant is a sign of very high pressure.
3. Make sure the electric fan is working. Visually check for obvious leaks from the radiator, hoses and under the car.
Note: It is normal for water to leak from the air conditioner when it is running for cooling. Caution: Be careful to keep your hands and clothing away from the fan and drive belts when the engine is running.
4. If coolant leakage is observed, stop the engine immediately.
5. If there are no leaks, check the expansion tank. If it is empty, add coolant while the engine is running. Fill it approximately half full.
Note: Do not attempt to remove the radiator filler cap when the engine and radiator are hot. You may be severely burned.
6. After the coolant temperature returns to normal, check the coolant level in the expansion tank again. If necessary, top it up to half. A large loss of coolant indicates a leak in the engine cooling system.