Pull the hood release lever under the instrument panel to raise the hood slightly. Get in front of the car. Push up the additional locking lever and lift the hood cover.
After lifting the hood cover, insert the end of the brace into the slot to hold the hood open.
The end of the hood support must be inserted into the slot in the front of the hood cover. Make sure the hood stay is securely fastened.
Before closing the bonnet, check that you have not left any tools, rags, sponges, etc. in the engine compartment, and then insert the brace into its mount in the engine compartment and push it down. This will reduce rattle. After that, close the hood cover and make sure that the latch clicks into place. If necessary, lightly press down on the front end of the hood until the latch clicks into place.