Contents: Removal and installation ↓ Adjustment ↓
Attention! Work is performed by two people.
Removal and installation
1. Lift the lid and install the support.
2. Remove the interior panel and disconnect all door connectors.
3. Disconnect the posts on both sides while having a helper support the lid.
4. Loosen the mounting bolts (indicated by arrows) loops and remove the cover.
5. Installation is carried out in reverse order.
Adjustment
1. The adjustment of the rear cover relative to the body is achieved by moving it with the hinge mounting bolts loosened. The cover is considered adjusted if the edges of the cover are parallel to the rear compartment door and the edge of the roof panel.
2. Adjust the engagement of the latch with the retainer by moving the retainer up and down, or back and forth.