Battery
Voltage - 12V
Capacity - 32, 40 or 60 Ah
Polarity - Minus on ground
The specific gravity of a fully charged battery is 1.250-1.270 at 20°C
Starter
Design - Starter without gearbox with traction relay or with gearbox, depending on the engine
Nominal voltage and power - 12 V, 0.8 kW, 1.0 or 1.4 kW
No load power:
- current consumption
- starter 0.8 kW less than 50 A at 11 V
- starter - 1.0/1.4 kW less than 90 A at 11 V
Speed - 5000 rpm (0.8 kW), 3000 rpm (1.1/1.4 kW)
Collector:
- outer diameter - 28.0 mm (30.0 mm with gearbox)
- minimum outside diameter - 27.0 mm (29.0 mm with gearbox)
- maximum collector ovality - 0.30 mm
- depth of cutouts of burnt layers - 0.5-0.8 mm
- minimum depth of cuts - 0.20 mm
Length of brushes:
- New brushes - Direct drive - 16.0 mm
- 1.0 kW - 13.5 mm
- 1.4 kW - 10.0 mm
Brush spring tension:
- With direct drive - 1.4-1.6 kg
- With gearbox - 1.8-2.4 kg
Alternator
Nominal voltage - 12 V
Nominal output current - 45, 50, 60 or 70 A
Connection - negative to ground
Direction of rotation: clockwise when viewed from the front
Rotor winding resistance: 2.8-3.0 Ohm
Length of brushes - 10.5 mm
Minimum brush length - 1.5 mm
Alternator/Water Pump Drive Belt Tension:
New belt:
- engine 4A-F/FE 8.5 - 10.5 mm
- 3S-FE engine and diesel engine - 11.5 - 15.5 mm
Used belt:
- engine 4A-F/FE - 10.0-12.0 mm
- 3S-FE engine and diesel engine - 13-17 mm