2. (Power window models). Remove the power window control panel.
3. Remove a decorative overlay of the internal handle of opening of a door.
4. (Power window models). Remove the armrest pad.
5. (Models without power windows). Remove the door trim.
A) Unscrew the two screws securing the inner door closing handle and remove it..
b) Disconnect the nine fastening clips and remove the door trim.
6. (Power window models). Remove the door trim.
A) Remove the three screws securing the inside door handle.
b) Disconnect the nine fastening clips and remove the door trim.
7. (Power window models). Unscrew the three fixing screws and remove the speaker.
8. Remove the waterproof service port cover.
9. Separate drafts of the lock, as it is shown in drawing.
10. Remove a back directing glass of a door.
A) Bend the edge of the door seal in the places indicated in the figure.
b) Remove two screws and one mounting bolt and remove the rear window guide.
11. Remove the rear fixed door glass as shown in the figure.
12. Turn off two bolts of fastening of a door glass to the mechanism of a window regulator and remove a door glass.
13. (Models without power windows). Remove the six mounting nuts and remove the power window mechanism.
14. (Power window models). Remove the power window mechanism assembly.
A) Disconnect the power window motor connector.
b) Remove the six mounting nuts and remove the power window mechanism assembly.
15. Remove the plug.
16. Remove the door lock.
A) (Models without power door lock). Unscrew the three fixing screws and remove the door lock.
b) (Power Door Lock Models). Disconnect the door lock motor connector.
V) (Power Door Lock Models). Loosen the three mounting screws and remove the power door lock assembly.
17. Turn off two screws of fastening and remove the external handle of opening of a door.