2. (Power window models). Remove the power window control panel from the driver's side.
3. (Power window models). Remove the power window control panel from the passenger side.
4. Remove a decorative overlay of the internal handle of opening of a door.
5. Remove an internal cover of a lateral rear-view mirror.
Note: Wrap the screwdriver with protective tape before use to avoid scratching the cover.
6. (Power window models). Remove the armrest pad.
7. (Power window models). Remove the decorative cap as shown in the illustration.
8. (Power window models). Remove the decorative speaker cover.
9. (Power window models). Loosen the four fixing screws and remove the speaker.
10. (Models without power windows). Remove the door trim.
A) Unscrew the two screws securing the inner door closing handle and remove it.
b) Remove the decorative cap and unscrew the screw securing the door trim.
V) Disconnect the ten fastening clips and remove the door trim.
11. (Power window models). Remove the door trim.
A) Remove the nine screws securing the door trim.
b) Disconnect the fastening caps and remove the door trim.
12. Remove the waterproof service port cover.
13. Separate drafts of the lock, as it is shown in drawing.
14. Turn off a bolt of fastening and remove an additional loudspeaker.
15. Turn off two bolts of fastening and remove a lateral external rear-view mirror.
16. Turn off two bolts of fastening of a door glass to the mechanism of a window regulator and remove a door glass.
17. (Models without power windows). Remove the six mounting nuts and remove the power window mechanism.
19. (Power window models). Remove the power window mechanism assembly.
A) Disconnect the power window motor connector.
b) Remove the six mounting nuts and remove the power window mechanism assembly.
20. Remove the door lock.
A) (Models without power door lock). Unscrew the three fixing screws and remove the door lock.
b) (Power Door Lock Models). Disconnect the door lock motor connector.
V) (Power Door Lock Models). Loosen the three mounting screws and remove the power door lock assembly.
21. Remove the two mounting screws and remove the outer door handle.