Without folding mirrors
a) Connect the battery to terminals "3" (+) and "2" (-) of the connector, check that the mirror turns up.
b) Change the polarity of the voltage, check that the mirror turns down.
c) Connect the battery to terminals "1" (+) and "2" (-) of the connector, check that the mirror turns to the left.
d) Change the polarity of the voltage, check that the mirror turns down.
With folding mirrors and mirror cleaning system
a) Connect the battery to terminals "7" (+) and "6" (-) of the connector, check that the mirror turns up.
This material is taken from a resource www.TOYOTAMAN.ru
b) Change the polarity of the voltage, check that the mirror turns down.
c) Connect the battery to terminals "5" (+) and "6" (-) of the connector, check that the mirror turns to the left.
d) Change the polarity of the voltage, check that the mirror turns down.
2. Checking the folding drive.
a) Connect the battery to terminals "4" (+) and "1" (-) of the connector, check that the mirror moves to the folded position.
b) Change the polarity of the voltage, check that the mirror returns to the working position.
3. Checking the operation of the mirror cleaning system. Connect the battery to terminals "9" (+) and "8" (-) of the connector, check that the mirror begins to shake.
4. Checking the mirror heater (with cleaning system). Connect the battery to terminals "11" (+) and "10" (-) of the connector, check that the mirror has heated up after 2 minutes.
- Resistance - more than 2.4 Ohm
5. Checking the limit switches. Check the conductivity between the connector terminals according to the table.
With folding mirrors
With mirror cleaning system
