Checking the door lock electric drive [Toyota Carina T190]

1. Checking the operation of the electric drive of the front door locks.

a) Connect "+" battery to pin "5", "-" to pin "7", check that the latch moves to the "unlocked" position (UNLOCK). There is conductivity between pins "4" and "6".

b) Reverse the polarity of the battery connection: the door lock latch should move to the "LOCK" position. No conductivity between pins "4" and "6".

2. Checking the operation of the rear door lock electric drive.

a) Connect battery "+" to pin "2", "-" to pin "4", check that the latch moves to the "unlocked" position (UNLOCK). There is conduction between pins "1" and "3".

The full article is posted on the website: www.TOYOTAMAN.ru

b) Reverse the polarity of the battery connection: the door latch should move to the LOCK position. No conductivity between pins "1" and "3".

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

The article material has been checked: Kondratyeva Ulyana

Share information:

◀ Previous

Carina T190: Equipment and devices

Next ▶

Checking the door limit switch
Checking the key presence sensor in the ignition switch
Checking the central lock switch (in the door lock)
Checking the central lock switch
Checking the door lock control relay of the central locking system

Remote lock — check
Remote lock receiver and transmitter
Electric sunroof drive — device
Checking the sunroof electric drive switch
Checking the operation of the electric motor