Remove the upper engine cover No.1.
Fig. 2.442. VSV valve connector
Disconnect the connector and 2 hoses (fig. 2.442).
Fig. 2.443. Fastening of the VSV valve
Remove 2 nuts then remove VSV (fig. 2.443).
(The material is reprinted from an online resource: «ToyotaMan»)
Install VSV and secure with 2 nuts.
Tightening torque: 7.5 Nm.
Connect the connector and 2 hoses.
Install the upper engine cover #1.
Connect the negative terminal to the battery terminal.
Tightening torque: 5.4 Nm.