Drain the engine oil.
Remove the lower left engine shield.
Removing the oil cooler assembly
Pic. 2.470. Oil cooler hose clamps
Disconnect 2 hoses from oil cooler (pic. 2.470).
Unscrew the hollow bolt fitting and remove the oil cooler.
Remove the O-ring from the oil cooler.
Remove the O-ring from the hollow bolt fitting.
Installing the oil cooler assembly
Clean the seating surface of the oil cooler.
Slide a new O-ring onto the hollow stud bolt.
Pic. 2.471. Sealing rings hollow bolt-fitting and oil cooler
Put a new O-ring on the oil cooler (pic. 2.471).
Apply a light coat of engine oil to the threads of the hollow stud bolt.
Pic. 2.472. Alignment of the oil cooler recess with the projections on the cylinder block
Align the recesses of the oil cooler with the projections on the cylinder block.
Install and secure the oil cooler with a hollow union bolt.
Tightening torque: 45 Nm.
Connect 2 hoses to the oil cooler.
Refill engine oil.
Refill coolant.
Check for engine oil leaks.
Check for coolant leaks.
Install the lower left engine shield.