2. Remove the trailing arm.
- A) Remove two bolts and nuts.
- b) Remove the trailing arm.
3. (For vehicles with LSPV) Disconnect the spring of the valve for redistribution of brake forces, depending on the load on the rear axle from the lower arm.
4. Remove the lower control arm N92.
- A) Loosen the two nuts and washers.
- b) Remove the #2 lower control arm.
5. Remove muffler center pipe and muffler.
6. Remove the lower control arm N91.
- A) Place a jack under the rear beam.
- b) Remove six bolts.
- V) Lower the rear beam.
- G) Remove the #1 lower suspension arm with two bolts and a washer.