- A) Install the knuckle and temporarily install the three bolts and nuts.
- b) Connect the trailing arm to the knuckle.
- V) Temporarily install the bolt and nut.
- G) Tighten the two nuts. Tightening torque 255 Nm.
2. (For vehicles with ABS) Install the speed sensor (ABS) and a valve spring for redistributing brake forces depending on the load on the rear axle.
- A) Install the speed sensor (ABS) on a fist. Tightening torque 7.8 Nm.
- b) Connect the rear brake force distribution valve spring to the lower control arm. Tightening torque 25 Nm.
3. Install brake shield and hub.
- A) Install the brake shield.
- b) Install a new O-ring.
- V) Install the hub. Tightening torque 80 Nm.
4. (For models with drum brakes) Install the brake hose. Tightening torque 29 Nm.
5. Stabilize the suspension.
- A) Install the rear wheel and lower the car. Tightening torque 103 Nm.
- b) By pushing the body down and lifting it up, stabilize the suspension.
6. Tighten the bolts. Tightening torque 181 Nm.