2. (For models with drum brakes) Remove the brake hose from the rack.
3. Remove the brake shield from the knuckle. Hang the brake shield on the wire.
4. (For vehicles with ASS) Remove the speed sensor (ABS) and a valve spring for redistributing brake forces depending on the load on the rear axle.
- A) Remove the speed sensor (ABS) from the fist.
- b) Disconnect the spring of the valve for redistribution of brake forces, depending on the load on the rear axle from the lower arm.
5. Remove your fist.
- A) Loosen three nuts.
Note: Do not remove bolts.
- 6) Turn away a bolt and a nut and disconnect the trailing arm from a fist.
- V) Remove three nuts and bolts.
- G) Remove your fist.