- A) Remove plug from gearbox
- b) Connect the front flange of the propeller shaft to the gearbox.
2. Establish the central basic bearing and temporarily tighten bolts of fastening to a body.
3. Install the rear driveshaft.
- A) Align the alignment marks on the flanges of the driveshaft and the rear differential and connect the shaft, securing it with four bolts, washers and nuts.
- b) Tighten bolts and nuts. Tightening torque 74 Nm.
4. Tighten the bolts securing the coupler to the rear flange
- A) Press the brake pedal and hold it.
- b) Using a socket wrench, tighten the coupler mounting bolts. Tightening torque 27 Nm.
5. Finally tighten bolts of fastening of the basic bearing to a body.