Caution: Do not start the engine.
Table. Error codes. A241E, A245E (until 1994.)
Note: codes 62, 63, 64, 68 indicate a fault in the electrical part of the electromagnetic valves. Faults in the mechanical part, such as valve sticking, are not recorded by the self-diagnosis system.
A245E (since 1994)
Note: codes 62, 63, 64, 68 indicate a fault in the electrical part of the electromagnetic valves. Faults in the mechanical part, such as valve sticking, are not recorded by the self-diagnosis system.
2. Short-circuit the "TE₁" and "E₁" terminals of the diagnostic connector.
3. Read and determine the fault code by the number of indicator blinks.
a) If two flashes occur per second, the system is working normally.
b) If there is one flash per second, there is a malfunction in the system. The code consists of two digits, the first digit is determined by the initial series of flashes, then there is a 1.5 second pause and a second series of flashes, which corresponds to the second digit of the code. If there are two or more malfunction codes, there will be a 2.5 second pause between them.
This material is taken from a resource [ToyotaMAN.ru]
Note: If there are several fault codes, the lowest code is always displayed first, followed by the remaining codes in ascending order.
4. Disconnect the "TE₁" and "E₁" terminals.