Removing
Disconnect ground cable (-) from the battery.
Attention: This will erase the entries in the memory of the on-board computer. In particular, fault records and radio code. Before disconnecting the battery, read the contents of the section «Removing and installing the battery».
Remove the four screws and remove the rear console.
Disconnect ashtray lighting cable and, depending on version, headlight adjustment switch.
Remove the shift lever knob.
Remove the 2 screws on the left and right of the front console and remove the console. Unplug lighting plug connection.
Installation
The console is installed in the reverse order of removal.
Connect ground cable (-) with rechargeable battery.
Set the time on the clock, if any, enter the alarm code into the radio receiver.