Thermostat controller
- This is the only visible control added to the ventilation system if your vehicle is equipped with air conditioning.
- The thermostat knob is used to turn the air conditioner on and off and to control the temperature of the chilled air.
Cooling
- Set the air flow regulator for normal cooling to the position «FRESH». For faster cooling, set the knob to «RECIRC».
- Set the air separation regulator for ventilation to position «VENT».
- Turn on the fan controller. Medium or high speeds are most effective.
- Set the thermostat knob to the desired temperature.
Ventilation without cooling
- Set the thermostat knob to position «OFF».
- Set all other controls in the same way as described in section «Ventilation system control».
Elimination of fogging of glasses
- Set the thermostat knob to the desired temperature.
- All other regulators should be set as described in the same paragraph of the previous section.
Practical instructions for use
Cm. «Practical instructions for use» from the section «Heating, ventilation and air conditioning control».