When measuring the oil level, the vehicle must be on a level surface.
The engine must be warm.
After stopping the engine, wait at least 3 minutes for the oil to drain into the oil pan.
Remove the dipstick and wipe it with a clean rag.
After that, insert the probe into place until it stops and remove it again. The oil level must be between the L and F marks.
Add oil when the level is close to the lower mark.
Oil is poured through the neck in the cylinder head cover. Add only oil intended for engine lubrication. Do not use additives.
Attention: Oil must not be filled above the F mark. Excess oil must be sucked off. Otherwise, the catalyst may be damaged.