Removing
Disconnect the fuel vapor outlet hose No. 1 from the adsorber.
Disconnect from an adsorber a fuel hose No. 1.
Pic. 2.598. Removing the adsorber
Remove the adsorber from the bracket (pic. 2.598).
Installation
Pic. 2.599. Scheme of adsorber installation
Install the adsorber on the bracket (pic. 2.599).
Note. When inserting the adsorber, press its body until the latches on the bracket and adsorber body are connected.
Note. Do not use the canister if it has been dropped or hit.
Pic. 2.600. Scheme for connecting to the adsorber hose No. 1
Connect fuel hose No. 1 to the adsorber (pic. 2.600).
Note. Make sure the hose clamp is in the correct position.
Connect the No. 1 fuel vapor outlet hose to the adsorber.
Note. Ensure that the hose clamp and color mark are in the correct position.