Removing
Disconnect the negative battery terminal.
Pic. 2.595. Electrovacuum valve
Remove electrovacuum valve No. 1 (pic. 2.595).
Disconnect the electrovacuum valve connector.
Disconnect the wire harness clamp.
Disconnect the No. 1 fuel vapor hose from the electrovacuum valve.
Disconnect the No. 3 fuel vapor outlet hose from the electrovacuum valve.
Remove the electrovacuum valve from a branch pipe of the air filter.
Installation
Pic. 2.596. Installation of an electrovacuum valve
Install the EV valve on the air filter nozzle (pic. 2.596).
Connect the No. 3 fuel vapor hose to the electrovacuum valve.
Note. Make sure the hose clamp is in the correct position.
Connect the No. 1 fuel vapor hose to the electrovacuum valve.
Note. Ensure that the hose clamp and color mark are in the correct position.
Pic. 2.597. Scheme of the correct installation of the electrovacuum valve
Install the wire harness clamp (pic. 2.597).
Connect the electrovacuum valve connector.
Connect the negative terminal to the battery terminal.
Tightening torque: 5.4 Nm.