1. Disconnect the battery from the ground.
2. Remove the interior door handle trim.
3. On vehicles with a manual window regulator, remove the window regulator handle by removing the latch by prying it with a thin bent tool.
4. On vehicles with power windows, pry up and remove the switch plate from the armrest and disconnect the connector.
5. Loosen the screws and remove the armrest.
6. Loosen the fixing screws on the lower edge of the door panel and remove the panel latches by inserting a tool between the trim and the door.
7. Make sure all latches and screws are removed, detach the panel and unplug all connectors. Remove the panel by pushing up a little.
8. In order to provide access to the details of the internal structure of the door, remove the bracket of the inner panel (if provided) and carefully remove the water shield. When assembling, install the screen in place, lightly lubricate the screen to secure.
9. Installation is carried out in the reverse order.