Contents: Windscreen wiper and washer…↓ Windscreen wiper and washer…↓ Windscreen wiper and washer…↓ Turning on the rear window wiper and…↓
Windscreen wiper and washer activation (Type A)
1. One-time wiper operation mode; 2. Low speed; 3. Increased speed; 4. Turning on the windshield washer
To turn on the wiper, move the lever to the desired position. To turn on the washer, press the button on the end of the lever.
The ignition key must be in the On position.
To enable single operation of the cleaner (when driving in fog) move the lever to the MIST position and release.
If the windshield washer does not turn on, check that there is water in the reservoir.
In cold weather, turn on the heated glass before turning on the washer. This will prevent icing, which can impair visibility.
Do not operate the cleaner on dry glass as the brushes may scratch it.
Windscreen wiper and washer activation (type B)
1. One-time wiper operation mode; 2. Intermittent wiper mode; 3. Low speed; 4. Increased speed; 5. Turning on the windshield washer
The ignition key must be in the On position.
To turn on intermittent operation of the wiper, move the lever to the INT position.
Windscreen wiper and washer activation (Type C)
1. Intermittent wiper mode; 2. Low speed; 3. Increased speed; 4. Turning on the windshield washer
To turn on the wiper, move the lever to the desired position. To turn on the washer, press the button on the end of the lever.
The ignition key must be in the On position.
To turn on intermittent operation of the wiper, move the lever to the INT position.
To turn on a single wiper operation when driving in fog, pull the lever towards you and release.
In addition, after turning on the washer, the wipers will automatically operate twice, even if the lever is in the Off position.
Turning on the rear window wiper and washer
1. Windscreen washer operation together; 2. Turning on the windshield wiper (normal mode); 3. Turning on the windshield wiper (intermittent mode); 4. Turning off the windshield washer
To turn on the wiper and washer, turn the handle on the end of the lever to the desired position.
The ignition key must be in the On position.
When the lever is in the INT position, the windshield wiper will operate in intermittent mode.
The windshield washer is activated at two extreme positions of the handle. When released, the handle automatically returns from these positions.