2. Remove the clamp.
3. Removing the wiper control switch.
Type 1
A) Disconnect the wiper control switch harness from the clamp.
b) Bend the three tabs and remove the wiper control switch cover.
V) Remove two screws.
G) Bend the clips and remove the wiper control switch.
d) Remove the connector lock.
e) Bend the clips, remove the wires and finally remove the wiper control switch.
Type 2
A) Remove two screws.
b) Bend the clips and remove the wiper control switch.
V) Remove the connector lock.
G) Bend the clips, remove the wires and finally remove the wiper control switch.
4. Install in the reverse order of removal. Note: do not mix up the colors of the connected wires.
without rear window wiper
with rear window wiper