Attention! See the warnings at the beginning of the Section Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system and the switch of the last.
1. Follow the procedures described in paragraphs 1 to 4 of Section Replacing the turn signal switch / mode switch for the operation of external lighting devices.
2. Disconnect the wiring from the wiper control switch assembly (right combination stalk).
3. Remove the switch from the body of your assembly (refer to accompanying illustration).
4. Installation is carried out in the reverse order. Before installing the steering wheel, make sure the centering of the SRS contact cable drum is correct (see chapter Suspension and steering).