2. Remove the parts according to the drawing "Replacing drive shaft seals".
3. Remove the seals.
a) Remove the left drive shaft oil seal.
b) Remove the right drive shaft oil seal as shown in the figure.
4. (C50)
Install the seals.
a) Using the special tool, install the left drive shaft oil seal as shown in the figure.
- The depth of pressing the seal is 2.1-2.7 mm
b) Using the special tool, install the right drive shaft oil seal as shown in the figure.
- The depth of pressing the seal is 2.1-2.7 mm
c) Apply consistent grease to the working lips of the seals.
5. (S50)
Install the seals.
a) Using the special tool, install the drive shaft seals as shown in the figure.
- Pressing depth of the seal is 0+0.5 mm
b) Apply grease to the working lips of the seals.
6. (E56F2, E57F)
Install the seals.
a) Using the special tool, install the left drive shaft oil seal as shown in the figure.
- Pressing depth of the seal is 0+0.5 mm
b) Apply grease to the working lips of the seals.
c) Using the special tool, install the right drive shaft oil seal as shown in the figure.
7. Install the parts according to the assembly drawing.
8. Install the front wheels.