Removing
1. Remove the left and right drive shafts (see chapter "Front drive shafts - removal").
4. Remove the left and right drive shaft seals using a puller.
Installation
1. Install the left drive shaft seal.
A) Install a new oil seal using a drift and hammer.
Seal insertion depth:
- A140E, A140L - 2.7±0.5 mm
- A540N - 0±0.5 mm
b) Lubricate the seal lip with grease.
2. Install the right drive shaft seal.
Seal insertion depth:
- A140E, A140L - 0±0.5 mm
- A540N - 0±0.3 mm
3. Install drive shafts (see chapter "Front drive shafts - removal").
4. Check the automatic transmission fluid level.