- The junction of the cylinder block and gearbox.
- The junction of the halves of the gearbox housing.
- Oil filler and drain plugs.
- Contact planes of drive shafts with gearbox.
When searching for a leak, you must do the following:
- Clean the gearbox housing with cleaner.
- Check the oil level. Top up if necessary.
- Sprinkle possible leak areas with lime or talc.
- Make a test drive. In order for the oil to become sufficiently fluid, it is necessary to drive on the highway for a distance of about 30 km.
- After a test drive, place the car on a lift and inspect the gearbox with a lamp.
