Contents: Removal ↓ Installation ↓
Removal
Attention! The described procedure is the same for the front and rear suspension rods.
1. Raise the car.
2. Unscrew the nut (indicated by the arrow) bolts securing the rod to the frame side member bracket.
3. Unscrew the nut (indicated by the arrow) bolts securing the rod to the bracket on the bridge beam.
The original publication can be found on the website: ToyotaMAN
4. Remove the barbell.
Installation
1. Installation is carried out in reverse order.
2. Tighten the rod mounting bolts under the vehicle's rated load.