Removing
1. Unscrew the gas tank cap and disconnect the battery from the ground.
2. Remove the air filter housing.
3. Disconnect the throttle cable.
4. On vehicles with automatic transmission, disconnect the downshift cable (kick-down-mode).
5. Label and disconnect all vacuum hoses and fuel supply hose from the carburetor.
6. Label and disconnect all connectors from the carburetor.
7. Loosen the mounting bolts and remove the carburetor and gasket.
8. Plug the hole in the manifold.
Installation
1. Installation is carried out in the reverse order, observing the following rules.
2. Remove any remaining gasket material.
3. Replace carburetor gasket.
4. Tighten the fastening bolts in a cross pattern with a torque of 20 Nm, making 1/4 turn at a time.
5. Adjust the kick-down cable.